Thrust Type Dismantling Joint introduce

The Thrust Type Dismantling Joint is applicable to the use of medium in the whole pipeline system. This product plays a connecting role in the whole pipeline system. The pipeline system is used to transport substances, mainly applicable to the following substances, such as gas, air, crude oil, fuel oil, living sewage, lubricating oil, fresh water, sea water, cold and hot water, drinking water, product oil And the temperature of these substances is not higher than 250 degrees of steam, granular powder and other media. Because these substances are mainly transmitted through pipelines, during pipeline transmission, these substances will certainly pass through the joint of force transfer joint or expansion joint, so the joint is directly related to whether the whole pipeline system is a benign transmission process. This purpose is very important and intuitive. The subtlety lies in connection, one inheritance, one transmission, which is the purpose of expansion joint.

Thrust Type Dismantling Joint Advantage

1. Simple and convenient installation, convenient valve installation, and able to withstand the axial tension of the pipeline.

2. The product is made of metal casting or welding. Trapezoidal rubber seal ring is selected for loose sleeve part under the action of gland and bolt.

3. Use the principle of rubber compression elastic deformation. Force the seal ring to deform between the outer wall of the expansion pipe of the joint body for static sealing.

4. The metal and sealing ring shall be selected in strict accordance with the service performance and user requirements. The exterior of the material is coated with high-strength anti-corrosion paint, and the connecting bolts of each part are made of high-strength carbon steel or stainless steel. Because there is a certain clearance between the body and the expansion pipe, it has a certain axial and radial displacement.

5. It can effectively compensate and relieve the thrust of pipeline and blind plate in the pipeline, and also facilitate the installation, maintenance and replacement of water pumps and valves. It is actually the most ideal supporting product in the pipeline installation and operation industry.

Product Parameter

Product Name	Thrust type dismantling joint
Material	Carbon Steel
Normal Specification	ID40-2000mm
Usage	Shipbuilding, Electricity
Work Temperature	-12℃+260℃
Size Available	Θ20mm-θ2500mm
Work Pressure	PN16 PN10
Feature	Can transfer axial thrust to the entire pipeline
Parts	Tie-rod and Nut
Surface	Carbon Steel Flange Epoxy Coating